| What to do |
How to do it |
| 1 |
Enter your five-digit access code. |
- On the door marked UCSD Self-Store, look for a numerical key pad. Enter your access code followed by the # sign.
- An electric door latch will release and allow you to enter.
Note: All entrance activities, including the date and time of entry, are recorded via the access code.
- For those who had a four-digit card just add 1 before the four digits (1XXXX#).
|
| 2 |
Enter the Self-Store facility and turn on the lights. |
- The storage facility has two levels:
- Three rotary dial light switches are located to the left of the double doors on both levels. Rotate each dial switch clockwise, and a bank of lights will activate for 30 minutes.
- Reset the timer at any time during the cycle. If not reset, the lights will automatically shut off in 30 minutes.
|
| 3 |
Use the dockside roll-up freight doors on the ground floor. |
- After you enter the storage facility via the front access door, you may open any or all of the roll-up doors. No additional access (keypad) entry is necessary.
|
| 4 |
Use the freight only elevator for freight access to/ from the mezzanine level. |
- Operating instructions are available at the elevator.
|
| 5 |
Avoid activating the silent alarm. |
- Note: If you hear a high pitched buzzing sound, this is a warning that the
silent alarm is about to be activated.
To avoid activating the silent alarm:
- Go to the nearest keypad.
- Enter your
access code.
- Press # or enter.
If you fail to follow these instructions, the police will be called.
|
| 6 |
Do not open the Emergency Use Only rear access door. |
- The Emergency Use Only rear access door is for emergencies only. If opened, a silent alarm is activated.
|
